2 Cu or Ni slugs + 1 Zn or Fe slug ** (compression)
4 dust
4 dust 3 dust **
1 Fe bar + 3 Fe slugs * (MIX ONLY ONCE)
3 Fe slugs * (to combine irons) * (to combine Cu/Ni alloy w/ iron
1.5 dust *
Results = 120 stones, 40 slugs volume, 3.0 density, 2.5% carbon
I haven't tested this mix, and you might have some goofyness with the Zinc in the first compression step, so I'd probably use iron there. The critical part will be combine all the iron bars and slugs before fore mixing with the dusted alloy or you'll have to much other stuff to end up with iron-alloy.
~Hanryu Ves'Shomis
Sword of House Calibanor, Ambassador of the Ilithi Court, Emerald Knight, Keeper of the CEC, ... still a
Ranger http://www.kynevon.info/CombatEquipmentCompendium.xls
